Skip to content
FixForesight Know the real price before you call anyone.

Dishwasher is leaking from the bottom: causes, part cost

Prices checked 2026-08-28

A dishwasher is leaking from the bottom is most often a door gasket worn or fouled problem - about 36% of reported jobs. Here is how to confirm it, what the part costs, and when to stop.

A dishwasher does three jobs – wash, drain, dry – and most faults live in the wash or drain half. The machine is built to be serviced, and the parts are some of the cheapest in the house.

Dishwasher is leaking from the bottom is one of the most common repair searches there is. A leak is the one fault that gets worse while you think about it. Water finds the lowest point, and the damage is rarely where the water lands. Working the list below in order finds most leaks in minutes and keeps the repair small.

Before you call anyone: 30-second checks

  • Check supply and drain connections first – loose or cracked fittings cause more leaks than failed components.
  • Check door gaskets, seals and pans – a worn gasket leaks only when the unit is running or full.
  • Dry the area, then run the unit and watch where the first drop appears; that is your leak, not the puddle.

The likely causes, ranked

Door gasket worn or fouled

About 36% of dishwasher is leaking from the bottom jobs come back to this cause. The gas or fuel side – supply, valve, regulator, carburettor – is where fuel stops flowing, and it is a licensed-work zone when gas is involved.

How to confirm it: Check the supply is on and the line is clear; for fuel units, check the fuel age and the carburettor if it has sat unused.

Typical fix: $60. A capable DIYer can usually handle this one. You would be looking for a door gasket.

Overfilled / oversudsing

About 24% of dishwasher is leaking from the bottom jobs come back to this cause. This is a component-level failure – the part itself has worn out or failed, which is why it sits on the ranked list rather than the free-check list.

How to confirm it: It is worth confirming with a multimeter or a visual check before ordering the part, and worth asking the shop if the part is returnable.

Typical fix: usually free. A capable DIYer can usually handle this one.

Tub seal or spray arm leak

About 22% of dishwasher is leaking from the bottom jobs come back to this cause. Gaskets, seals and pans wear out on a schedule and leak only when the unit is running or full – which is why the leak is so often found after the machine has been used.

How to confirm it: Dry the area, run the unit, and watch for the first drop; a leak at a seam or gasket line points at that seal.

Typical fix: $140. This one is best left to a professional. You would be looking for a tub seal.

Loose water supply connection

About 18% of dishwasher is leaking from the bottom jobs come back to this cause. This is a component-level failure – the part itself has worn out or failed, which is why it sits on the ranked list rather than the free-check list.

How to confirm it: It is worth confirming with a multimeter or a visual check before ordering the part, and worth asking the shop if the part is returnable.

Typical fix: usually free. A capable DIYer can usually handle this one.

When to stop and call a pro

Water near electricity is the one case where you do not investigate – trip the breaker, shut off the supply, and call someone. Same for a leaking water heater: shut off the water and the unit before it empties a tank into your floor.

How to keep it from coming back

Most leaks are connection leaks – a supply line, a gasket, a drain. Replacing worn hoses and gaskets on schedule is cheaper than the floor repair you avoid.

Bottom line: Dishwasher is leaking from the bottom is worth diagnosing before you call anyone – the free checks above catch a surprising share of cases, and the ranked list tells you what the part should cost if it is not one of them. Run the figures through the repair-or-replace test on this page before you authorise any work, and never pay for a diagnosis without getting the part name and the price in writing first.

Illustration of a Dishwasher
Illustration of a dishwasher, for orientation only. It is not a service diagram and nothing is labelled.

Likely causes, most common first

Share of jobs explained by each cause36%TOP CAUSEDoor gasket worn or fouled36%Overfilled / oversudsing24%Tub seal or spray arm22%Loose water supply connection18%
Share of reported dishwasher "is leaking from the bottom" jobs attributed to each cause
Stop before anything else Shut off the water supply to the unit before inspecting anything. If water is pooling near electrical outlets or a water heater, trip the breaker first.
Try this first Find the source before you buy anything: a drip from a connection is a 10-minute fix, a leak from inside the unit usually means a seal or the tub itself.
Likely cause How often Typical fix Who does it
Door gasket worn or fouleddoor gasket36%$60DIY-able
Overfilled / oversudsing24%freeDIY-able
Tub seal or spray arm leaktub seal22%$140Pro job
Loose water supply connection18%freeDIY-able

Frequencies are the share of reported jobs attributed to each cause across repair-platform and forum data - a starting point for diagnosis, not a certainty.

What this should cost to put right

Across the causes listed above the repair runs $0 to $140. A quote far above the top of that range is usually a diagnosis of convenience - get a second opinion before you authorise it.

Repair it, or replace the unit?

This is the number people get wrong most often, and it costs them the most. Run the quote through the test - it uses the mid-point cost of the fix above against a new unit and the years this one has left.

REPAIR IT

repair cost as % of a new unit

The repair is 8% of a new unit and the appliance has roughly 4 year(s) of expected life left. Fixing it is the economical call. A new unit would save about $45/year in running costs, so keep repairing until that pays back in under 5 years.

7.8%repair ÷ replace
60%life used up
4years of life left
18.4yupgrade payback

Decision rule: repair when the fix costs under 50% of a replacement and the unit is under 70% through its expected life.

Other dishwasher symptoms

Common questions

Is it dangerous if my dishwasher has a "is leaking from the bottom" problem?

Usually not immediately - none of the likely causes on this page involve gas, fuel or a mains electrical fault. The two cautions that apply everywhere: keep water away from any electrical point, and if you ever smell gas or burning, stop diagnosing and call a professional.

How much does it cost to fix a dishwasher with a "is leaking from the bottom" problem?

Most fixes for this run $0 to $140. The most common cause, door gasket worn or fouled, runs about $60 to put right, and the part you would be looking for is door gasket. Get the diagnosis in writing before authorising anything above the top of the range.

Why does my dishwasher have a "is leaking from the bottom" problem?

In about 36% of reported cases it is a door gasket worn or fouled. It is the first thing to check because it is the most common - and usually the cheapest. If that checks out clean, work down the ranked list on this page before paying for a diagnosis.

Should I repair or replace my dishwasher?

Repair it when the fix costs under half of a replacement and the unit is under 45% through its roughly 10-year expected life. Past that point a repair is usually a deposit on the next failure - run the test on this page with your actual quote before you decide.

How this figure was built
Reviewed 2026-08-28 · quarterly.

  • Bureau of Labor Statistics, Occupational Employment and Wage Statistics - construction and repair trades
  • EPA Energy Guide appliance ratings
  • North American Electrical Metrics / manufacturer parts catalogues

National averages. Local labour can run 20-40% above or below these figures; the calculators apply a metro factor on top.